Sylvania Flat Panel Television 6613LD User Manual

SYLVANIA  
LIMITED WARRANTY  
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workman-  
LCD TELEVISION  
Owner’s  
Manual  
ship as follows:  
6613LD  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from  
the date of original retail purchase. Certain parts are excluded from this warranty.  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date  
of original retail purchase.  
(13 INCH Photo Stand Type)  
LABOR:  
6615LD  
(15 INCH Tilt Stand Type)  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT  
OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PROD-  
UCT TO OBTAIN SERVICE UNDER THIS WARRANTY..  
FEATURES  
MTS/SAP Tuner  
G
This warranty shall not be extended to any other person or transferee.  
G
G
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if  
service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any  
the product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does  
not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup-  
plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter-  
ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or  
damage which results from fire, flood, lightning or other acts of God.  
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-  
ing system provides free and easy channel selection, and lets you tune directly to any channel  
using the channel number buttons (0~9 and +100-key) on the remote control.  
On-Screen Function Display  
G
G
G
G
Full-Function Remote Control  
Sleep Timer  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE  
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,  
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.  
Auto Shut Off Function- If there is no air signal input from the antenna terminal and no  
user operation for 15 minutes, the TV will turn itself off automatically.  
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.  
S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS  
VCR tapes, Video Discs, Satellite System, Video Game or Video Cameras.  
Component Input  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE  
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF  
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS  
FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN  
THE UNITED STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY FUNAI AUTHORIZED SER-  
VICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED  
SERVICE FACILITY.  
G
G
G
G
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.  
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS  
COSTS WILL BE CHARGED.  
PRECAUTIONS  
IMPORTANT:  
G
G
G
G
Place your TV in a room with adequate ventilation.  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT  
VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO  
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.  
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.  
Do not place your TV on soft surfaces, such as rugs or blankets.  
Leave enough room for air to circulate around the bottom, top and back of the set.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT  
The serial number of this product may be found on the back of the TV. No others have the same  
serial number as yours. You should record the number and other vital information here and retain  
this book as a permanent record of your purchase to aid identification in case of theft.  
WITHOUT PRIOR NOTICE.  
To locate your nearest SYLVANIA Authorized Service Center or general service procedure,  
please call 1-800-968-3429 or write to the following:  
FUNAI CORPORATION  
Customer Service  
Date of Purchase  
Dealer Purchase from  
Dealer Address  
Dealer Phone No.  
Model No.  
Serial No.  
100 North Street; Teterboro, NJ 07608  
Tel :1-800-968-3429  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
This Owner’s Manual is made of recycled paper.  
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING  
AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE  
1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.funai-corp.com  
0EMN02183  
Printed in China  
L0111UB / L0131UB * * * * *  
PHOTO STAND / TILT STAND  
Photo Stand (6613LD)  
Tilt Stand (6615LD)  
H
E
A
D
P
E
H
O
N
E
C
O
M
P
O
N
N
T
P
R
Adjust the stand to change the angle of TV.  
Adjust the length of the stand in 2 types (long or short) to change  
the angle of TV.  
P
B
Y
A
V
O
-
I
N
2
R
L
A
U
D
I
P
O
W
E
T
R
S
-
V
I
D
E
O
V
A
O
V
D
E
N
O
1
L
A
U
D
I
O
R
I
N
P
U
D
C
1
2
V
-
I
A
N
T
.
CONNECTIONS  
Note to CATV system installer:  
VHF  
CAUTION: TO PREVENT ELECTRIC  
SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT, FULLY INSERT.  
This reminder is provided to call the CATV system installer's attention to  
Article 820-40 of the NEC that provides guidelines for proper grounding  
and, in particular, specifies that the cable ground shall be connected to  
the grounding system of the building as close to the point of cable entry  
as practical.  
Antenna  
(Not supplied)  
UHF  
Antenna  
ATTENTION:  
(Not supplied)  
POUR ÉVITER LES CHOC ÉLECTRIQUES,  
INTRODUIRE LA LAME LA PLUS LARGE  
DE LA FICHE DANS LA BORNE CORRE-  
SPONDANTE DE LA PRISE ET POUSSER  
JUSQUAU FOND.  
*Some cable TV systems  
use scrambled signals and  
require a special converter  
to receive these channels.  
Consult your local cable  
company.  
(6615LD)  
CATV Box *  
or Satellite Box  
(Not supplied)  
#Do not use other AC adapter.  
Otherwise, the TV may break down.  
OR  
FCC WARNING- This equipment may  
generate or use radio frequency energy.  
Changes or modifications to this equip-  
ment may cause harmful interference  
unless the modifications are expressly  
approved in the instruction manual.  
The user could lose the authority to  
VHF/UHF Combiner  
(Not supplied)  
OUT  
IN  
From Cable System  
or Satellite Antenna  
75-ohm  
AC adapter #  
(Supplied)  
AC cord  
(Supplied)  
Coaxial Cable  
From household  
AC outlet  
75-ohm  
Coaxial Cable  
VHF/UHF  
operate this equipment if an unautho-  
rized change or modification is made.  
Combination Antenna  
(Not supplied)  
OR  
From Cable System  
Use the supplied RF cable to connect to the ANT.in jack. Otherwise, the picture may become unclear.  
CLOSED CAPTION  
This TV can receive C1 and C2 Caption and Text.  
Notes:  
(1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a  
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or  
text.  
Caption Mode  
(1)Closed Caption Characters can be displayed on the TV screen only when the received broad-  
cast signal contains Caption Signals.  
(2)Paint-on mode: Displays input characters on the screen immediately.  
Pop-on mode: Once characters are stored in memory, they are displayed all at once.  
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)  
Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters  
will not be displayed.  
(2)Captions and texts may not match the TV voice exactly.  
(3)Interference may cause the closed caption system not to function properly.  
(4)The caption or text characters will not be displayed while the menu display or functions dis-  
play is shown.  
(5)If you see this screen:  
Text Mode  
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To  
clear screen, select CAPTION C1, C2 or CAPTION [OFF].  
(1)Displays the text on the screen by scrolling (max. 7 lines)  
(2)If the received broadcast signal does not contain caption or text signals, no change will occur.  
 
PREPARATION FOR USE  
3) Press the VOL(ume) L button so that "ADD/DELETE" is selected.  
4) Use the CH(annel) L or M button to select the channel you wish to put  
into memory or to erase from memory.  
Note: The display will return to the normal screen automatically in about  
10 seconds.  
ADD/DELETE  
AUTO MEMO  
LANGUAGE SELECTION  
If you want to change the language of the on-screen menu, follow the proce-  
dure below.  
PICTURE  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
1) Connect the power cord to a standard AC outlet.  
Note: If some digits appear in the corner of the screen,  
press the POWER button without unplugging the power cord.  
2) Press the POWER button to turn on the TV.  
3) Press the MENU button so that the menu display appears  
on the TV screen.  
4) Press the CH(annel) L or M button to point to "[ENG]".  
5) Select "ENG"(English), "ESP"(Spanish) or "FRA"(French)  
by using the VOL(ume) L or M button.  
Perform "ADD/DELETE" function while this display appears on the screen.  
Press the VOL(ume) L or M button to light up the channel number  
G
in LIGHT BLUE if you wish to add the channel into memory.  
Press the VOL(ume) L or M button to light up the channel number  
G
in LIGHT RED if you wish to erase the channel from memory.  
5) Press the MENU button to exit the menu.  
PICTURE  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
MTS (Multi-Channel Television Sound) System  
6) Press the MENU button to exit the menu.  
You can listen to a program in MTS stereo by following the steps below.  
Menu  
To show the status, press the  
DISPLAY button on the remote  
control.  
Selection  
CHANNEL PRESETTING  
MAIN  
MONO  
SAP  
Type of  
NOTE:You MUST PRESET channels BEFORE using CHANNEL L or M button.  
To preset a channel or to change a preset channel, follow the procedure below.  
1) Press the POWER button to turn on the TV.  
broadcast  
-None-  
-None-  
MONO  
MAIN  
-None-  
Regular  
Stereo  
broadcast  
SAP: Second Audio Program,  
which means your program, can  
also be received in a second lan-  
guage or sometimes a radio station.  
PICTURE  
STEREO  
STEREO  
2) Press the MENU button so that the menu display appears  
on the TV screen.  
3) Press the CH(annel) L or M button to point to "CHANNEL SET".  
Then, press the VOL(ume) L button.  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
MAIN  
SAP  
SAP  
[To Select STEREO, MONO or SAP in Stereo broadcast]  
4) Press the CH(annel) L or M button to point to "AUTO MEMO".  
Then, press the VOL(ume) L button.  
1) Press the MENU button so that the menu display appears on the TV screen.  
2) Press the CH(annel) L or M button to point to "TV SOUND".  
3) Press the VOL(ume) L or M button to select your desired stereo mode. ([MAIN], [MONO] or  
[SAP])  
ADD/DELETE  
AUTO MEMO  
The tuner scans and memorizes all active channels in your area.  
G
G
G
G
The TV distinguishes between standard TV channels and cable (CATV)  
channels.  
When AUTO MEMO action is completed, the lowest memorized channel reappears on the  
screen.  
When you press the CH(annel) L or M button after selecting AUTO MEMO,  
the tuner will stop at the memorized channels only.  
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If  
this happens, try the AUTO MEMO action again when reception conditions are better.  
: Press the VOL(ume) L or M button.  
PICTURE  
PICTURE  
PICTURE  
CHANNEL SET  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION [ C2]  
TV SOUND [SAP]  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION [OFF]  
CAPTION [ C1]  
TV SOUND [MAIN]  
TV SOUND [MONO]  
[ADD/DELETE FUNCTION]  
1) Press the MENU button so that the menu display appears on the TV  
screen.  
2) Press the CH(annel) L or M button to point to "CHANNEL SET".  
Then, press the VOL(ume) L button.  
PICTURE  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
RESUME FUNCTION  
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-  
ly when the power resumes.  
OPERATIONS  
WATCHING A TV PROGRAM  
PICTURE ADJUSTMENT  
1) Press the MENU button so that the menu  
1) Press the POWER button to turn on the TV.  
2) Select the desired channel with the CH(annel) L or M button.  
3) Adjust the volume to the desired listening level using the VOL(ume) L or M button.  
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)  
VOL(ume)  
VOL(ume)  
display appears on the TV screen.  
2) Press the VOL(ume) L button so that "PIC-  
TURE" is selected.  
3) Press the CH(annel) L or M button to select  
MANUAL. Then, press the VOL(ume) L  
button.  
4) Select the feature you wish to adjust with  
the CH(annel) L or M button and adjust it  
with the VOL(ume) L or M button.  
to decrease  
brightness  
to decrease  
contrast  
to increase  
brightness  
to increase  
contrast  
BRIGHT  
CONTRAST  
SETTING THE SLEEP TIMER  
The sleep timer function allows you to have the POWER automatically turn  
off after a set time period.  
1) Press the POWER button to turn on the TV and press the SLEEP button  
on the remote control .  
to pale  
to brilliant  
COLOR  
to purple  
to soft  
to green  
to clear  
TINT  
SHARPNESS  
SLEEP 10  
2) You may change the sleep time by pressing the SLEEP  
: Press the CH(annel) L or M button.  
button on the remote control repeatedly. The timer can be  
set up to 90 minutes, 10 minutes each time the SLEEP  
To cancel the sleep timer:  
button is pushed. (The timer display counts up and sleep  
Press the SLEEP button repeated-  
timer will be displayed on the screen when you press the  
ly until "SLEEP 0" is displayed.  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
[-]  
[+]  
BRIGHT  
SHARPNESS  
CONTRAST  
COLOR  
TINT  
SLEEP button on remote control.)  
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the  
sleep time will be lost.  
Note:  
G
In the above steps, the picture adjustment display will disappear from the TV screen automati-  
cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)  
L button so that "PICTURE" is selected. Then, press the CH(annel) L or M button repeatedly  
until the display returns to the screen.  
CLOSED CAPTION SELECTION  
You may view specially labeled (cc) TV pro-  
grams, movies, news, prerecorded tapes, etc.  
with either a dialogue caption or text display  
added to the program.  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) L or M button to point  
to "CAPTION".  
3) Press the VOL(ume) L or M button to select  
the mode you wish.  
[USING THE GAME BUTTON]  
You can set the Game mode and external input mode at the same time by pressing the GAME but-  
ton on the remote control. GAMEappears on the TV screen.  
G
To exit the Game mode and external input mode, press the GAME button on the remote control  
again.  
4) When done, press the MENU button to exit  
the menu.  
: Press the VOL(ume) L or M button.  
G
To cancel the Game mode only, adjust the picture control. In this case, VIDEO1instead of  
GAMEappears on the TV screen.  
G
PICTURE  
PICTURE  
PICTURE  
PICTURE  
PICTURE  
If you press the GAME button when the TV is off, the TV turns on and will be in the Game  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION [OFF]  
TV SOUND [MAIN]  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION  
TV SOUND [MAIN]  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION  
TV SOUND [MAIN]  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION  
TV SOUND [MAIN]  
CHANNEL SET  
[ENG] / ESP / FRA  
V-CHIP SET UP  
CAPTION [ T2]  
TV SOUND [MAIN]  
mode and external input mode automatically.  
[
C1]  
[
C2]  
[
T1]  
 
3) Press the CH(annel) L  
or M button to point to  
"MPAA RATING".  
Then, press the  
VOL(ume) L button.  
4) Press the CH(annel) L  
or M button to point to  
your desired item.  
3) Press the CH(annel) L  
or M button to point to  
"TV RATING". Then,  
press the VOL(ume) L  
button.  
4) Press the CH(annel) L  
or M button to point to  
your desired item.  
G
When you select [TV-Y7]:  
Press the CH(annel) L  
or M button to select  
B TV RATING  
MPAA RATING  
TV RATING  
B MPAA RATING  
V-CHIP SET UP  
TV-Y7  
[BLOCK]  
[BLOCK]  
V-CHIP enables parents to prevent their chil-  
dren from watching inappropriate material on  
TV.  
"FV" (Fantasy  
B FV  
Violence). Then, press  
the VOL(ume) L button  
to select [BLOCK] or  
[VIEW].  
V-CHIP reads the ratings for programming  
(except for news and sports programs, unedit-  
ed movies on premium cable channels, and  
Emergency Broadcast System signals), then  
denies access to programming if the program's  
rating meets or exceeds the limitations you  
select. In this case, "PROTECTED PRO-  
GRAM by ..." message appears on the TV  
screen.  
B TV-Y  
TV-Y7(  
TV-G  
TV-PG(  
TV-14(  
TV-MA(  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
B G  
PG  
PG-13  
R
NC-17  
X
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
)
B TV-Y  
TV-Y7(  
TV-G  
[VIEW]  
[VIEW]  
[BLOCK]  
)
)
)
)
G
When you select [TV-  
PG], [TV-14] or [TV-  
MA]:  
Then, press the  
VOL(ume) L button to  
select [BLOCK] or [VIEW].  
Then, press the  
VOL(ume) L button to  
select [BLOCK] or [VIEW].  
TV-PG(DLSV) [BLOCK]  
TV-14 (DLSV) [BLOCK]  
TV-MA( LSV) [BLOCK]  
Press the CH(annel) L  
or M button to select  
"D" (Suggestive  
<Selection>  
G:  
<Rating Category Explanations>  
General Audience  
Parental Guidance suggested.  
Unsuitable for children under 13  
Restricted; under 17 requires  
accompanying  
<Selection>  
Explanations>  
TV-Y:  
<Rating Category  
TV-PG  
[BLOCK]  
D
L
[BLOCK]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
PG:  
Appropriate for all children  
Appropriate for children seven and  
older  
PG-13:  
R:  
TV-Y7:  
Dialog), "L"(Coarse  
Language), "S"(Sexual  
Situation), or "V"  
S
V
To block certain ratings, follow the steps  
below.  
TV-G:  
General Audience  
parent or adult guardian  
No one under 17 admitted  
Mature audience only  
TV-PG:  
TV-14:  
TV-MA:  
Parental Guidance suggested.  
Unsuitable for children under 14  
Mature audience only  
G
Programming may be rated by the Motion  
Picture Association of America (MPAA) or  
according to the Television Parental  
Guidelines. In order to block any inappro-  
priate programming, set your limits in both  
places (MPAA RATING and TV RATING).  
You cannot access the menu when the  
"PROTECTED PROGRAM by ..." message  
appears. In this case, change to an  
NC-17:  
X:  
(Violence). Then, press the VOL(ume) L  
button to select [BLOCK] or [VIEW].  
Note: When you select [TV-MA], "D" does  
not appear on the TV screen.  
The sub-ratings which set to [BLOCK]  
appear next to the rating category in the TV  
RATING menu.  
G
When you select the rating category and  
turn it to [BLOCK], the higher rating will  
turn [BLOCK] automatically. Also, the  
lower rating will turn [VIEW] automatically.  
When you turn "G" to [BLOCK] or  
G
When you select the rating category and turn  
it to [BLOCK], the higher rating will turn  
[BLOCK] automatically. Also, the lower rat-  
ing will turn [VIEW] automatically.  
G
G
G
G
G
G
When you turn "TV-Y" to [BLOCK] or  
[VIEW], then all ratings will turn to  
[BLOCK] or [VIEW] automatically.  
When you turn "TV-MA" to [VIEW], then  
all ratings will turn to [VIEW] automatically.  
[VIEW], the all ratings will turn to  
unblocked channel, then press the MENU  
button.  
[BLOCK] or [VIEW] automatically.  
When you turn "X" to [VIEW], then all rat-  
ings will turn to [VIEW] automatically.  
5) Press the MENU button to exit the menu.  
5) Press the MENU button to exit the menu.  
[MPAA RATING SET UP]  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) L  
[TV RATING SET UP]  
[V-CHIP SET UP SUB RATINGS]  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) L or M button to point  
to "V-CHIP SET UP".  
When you select TV-Y7, TV-PG, TV-14, or TV-  
MA and you press the VOL(ume) L button, the  
sub-ratings will appear on the TV screen.  
If you select the rating category (example: TV-  
PG) and turn it to [BLOCK] or [VIEW], the  
sub-ratings (example: V for Violence) will turn  
[BLOCK] or [VIEW] automatically.  
PICTURE  
or M button to point to  
CHANNEL SET  
[ENG] / ESP / FRA  
B V-CHIP SET UP  
"V-CHIP SET UP".  
Then, press the  
VOL(ume) L button.  
CAPTION  
TV SOUND  
[OFF]  
[MAIN]  
Then, press the VOL(ume) L button.  
You can set the sub-ratings to [BLOCK] or  
[VIEW] individually when the rating category  
is set to [BLOCK]. To set the sub-ratings indi-  
vidually, follow the steps below.  
TROUBLESHOOTING GUIDE  
MAINTENANCE  
CABINET CLEANING  
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-  
looked possibilities. Before arranging for service, check these items. It could save you time and money.  
PICTURE SCREEN CLEANING  
G
Wipe the front panel and other exterior sur-  
faces of the TV with a soft cloth immersed  
in lukewarm water and wrung dry.  
If the liquid crystal display panel should  
require cleaning, wipe it with a cotton or soft  
cloth. Before cleaning the picture screen, dis-  
connect the power cord.  
G
Never use a solvent or alcohol. Do not spray  
QUICK SERVICE CHECK LIST  
POSSIBLE REMEDY  
insecticide liquid near the TV. Such chemi-  
cals may cause damage and discoloration to  
the exposed surfaces.  
SUPPLIED ACCESSORIES  
Try a new channel, if OK, then possible station trouble.  
Is TV plugged in?  
Power at outlet?  
AC cord  
Remote control unit  
Is TV’s POWER button on?  
AC adapter  
RF cable  
Owners Manual  
(NE122UD)  
Is antenna connected to terminal on the back of the set?  
If outside antenna is being used, check for broken wire.  
Check for local interference.  
Turn off with POWER button and then turn it on after about a minute.  
Adjust COLOR control.  
Batteries ("AA" x 2)  
Adjust CONTRAST & BRIGHT control.  
Check batteries in Remote Control.  
SPECIFICATIONS  
GENERAL SPECIFICATIONS  
Move the TV away from the nearby appliances which have Magnetism.  
Turn off using the POWER button, then turn it on again 30 minutes or so later.  
Temperature around is too low.  
Life of the Back Light is approximately 50,000 hours. Ask the Service Center to replace.  
It is quality of the LCD Panel.  
OTHER SPECIFICATIONS  
Television system:  
NTSC-M  
Remote control:  
Digital encoded  
TV Standard  
infrared light system  
Closed Caption System: §15.119/FCC  
Channel coverage  
Operating temperature: 5°C to 40°C (41°F~104°F)  
Closed Caption Problem  
Possible Remedy  
Power requirements:  
DC12V  
My TV is showing captions that are  
misspelled.  
You are watching a live broadcast and spelling errors made by the  
closed captioning production company may pass through uncorrect-  
ed. A prerecorded program will not show any misspelled words  
because of the normal time available for editing the captions.  
VHF:  
UHF:  
CATV:  
2 ~ 13  
14 ~ 69  
2 ~ 13, A ~ W,  
W+1 ~ W+84,  
A-5 ~ A-1, 5A  
181 channel  
frequency synthesized  
tuning system  
Direct access keyboard,  
programmable  
scan and up/down  
Power consumption(Maximum): 41W(6613LD)  
44W(6615LD)  
LCD:  
13"(6613LD)  
15"(6615LD)  
6613LD  
Dimensions(H x W x D):  
Photo Stand open  
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue  
or there is a delay of what is being said.  
Tuning System:  
Channel access:  
are common for live broadcasts. Most captioning production compa-  
nies can display a dialogue to a maximum of 220 words per minute.  
If a dialogue exceeds that rate, selective editing is used to insure that  
the captions remain up-to-date with the current TV screen dialogue.  
9-15/16"(252.5mm) x 16-5/8"(422mm) x 5-7/8"(148.5mm)  
Photo Stand close  
10-5/8"(270.5mm) x 16-5/8"(422mm) x 2-1/8"(53.5mm)  
Weight:  
My captions are scrambled with white  
boxes on the TV screen.  
Interference caused by building, power lines, thunderstorms, etc.  
may cause scrambled or incomplete captions to appear.  
Terminals  
With Photo Stand: 7.3 lbs. (3.3kg)  
Without Photo Stand:6.8 lbs. (3.1kg)  
Antenna input:  
VHF/UHF/CATV  
75 ohm unbalanced  
(F-type)  
6615LD  
Dimensions(H x W x D):  
With Tilt Stand  
My program guide listed a TV show as  
being closed captioned  
but none of the captions were displayed.  
Broadcasters may at times use a time compression process to the  
actual program so that additional advertising time can be given.  
Since the decoder cannot read the compressed information, captions  
will be lost.  
S-Video input:  
Video input:  
Audio input:  
Mini DIN 4-pin jack  
RCA connector  
RCA connector x 4  
12-5/16"(313.5mm) x 18-1/8"(460mm) x 9-7/16"(240.5mm)  
Without Tilt Stand  
My prerecorded videotape does not show  
any captions. The tape box mentions it  
being closed captioned.  
The videotape was either an illegal copying or the tape duplicating  
company accidentally left out the captioning signals during the  
copying process.  
Component video input:  
11-13/16"(300.5mm) x 18-1/8"(460mm) x 2-1/8"(53.5mm)  
Weight:  
One pin jack (Y), 1Vpp(75 ohm)  
Two pin jacks (PR)/(PB), 700mVpp(75 ohm)  
With Tilt Stand:  
9.3 lbs. (4.2kg)  
Headphone:  
1/8" monaural(3.5 mm)  
1W, 8 ohm x 2  
Without Tilt Stand: 8.2 lbs. (3.7kg)  
Designs and specifications are subject to  
change without notice and without our  
legal obligation.  
If there is a discrepancy between languages,  
the default language will be English.  
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION  
channels. [OFF].  
Stereo Sound System  
2 speakers  
2 ways AV input  
Sound output:  
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non  
active pixels may appear as a tiny spec of color. This in not to be considered a defect in the LCD  
screen.  
 

Sharp Speaker System HT SB30 User Manual
Sony Camcorder XDCAMTM User Manual
Sony Indoor Furnishings SU 30HX1 User Manual
Sony Microcassette Recorder WM GX654 User Manual
Sony Network Card BKPF L753A User Manual
Sony Network Card MSAC PR1 User Manual
StarTechcom Projection Television WIFI2HDMC User Manual
SUPER MICRO Computer Computer Hardware X9DRG HF User Manual
Swann Home Security System SW216 2DS User Manual
Sylvania CD Player SRCD817 User Manual